Outdoor Unit Installation - Sharp GX-X18JR Installation And Operation Manual

INSTALLATION INSTRUCTIONS

Outdoor unit installation

Dimensions of outdoor unit
Item
Model
GU-X8JR
GU-X24JR
GU-X36JR
Installation spaces
MIN.
500
Precautions on installation of outdoor unit
To ensure the unit in proper function, selection of installation location must be in accordance with
following principles:
• Outdoor unit shall be installed so that the air discharged by outdoor unit will not return and that
sufficient space for repair shall be provided around the machine.
• The installation site must have good ventilation, so that the outdoor unit can take in and
exhaust enough air. Ensure that there is no obstacle for the air intake and exhaust of the
outdoor unit. If there is any obstacle blocking the air intake or exhaust, remove it.
• Place of installation shall be strong enough to support the weight of outdoor unit, and it shall be
able to insulate noise and prevent vibration. Ensure that the wind and noise from the unit will
not affect your neighbors.
• Avoid direct sunshine over the unit. It is better to set up a sun shield as the protection.
• Place of installation must be able to drain the rainwater and defrosting water.
• Place of installation must ensure the machine will not be buried under snow or subject to the
influence of rubbish or oil fog.
• The installation site must be at a place where the air exhaust outlet does not face strong wind.
GREE_cassette_eng.indd 28
B
Unit:mm
A B C D
848 320 540 548
93 378 680 548
032 42 250 572
MIN.
500
E-28
D
A
E
286
340
378
MIN.
2000
MIN. 500
Unit:mm
08.10.28 11:42:47 AM