Sharp GX-X18JR Installation And Operation Manual page 29

Caution
. Improper screwing of the screws may cause the troubles.
Air leak from ceiling
2. If gap is still left between the ceiling and the panel after screwing the screws, readjust height of
the indoor unit.
No gap is allowed
• After fixing be sure no gap left between the ceiling and the panel
3. Wiring of the panel.
Connect the joints for swing flap motor lead wire installed on the panel to the joints on the indoor
unit.(2 places)
GREE_cassette_eng.indd 27
Air leak
Contamination dew condensation, dew dripping
Indoor unit
Panel
Adjustment indoor unit from the holes in the
corner of the panel is possible if the indoor
unit is kept leveled and the drainage pipe
piping etc is unaffected.
Indoor unit Panel
E-27
08.10.28 11:42:47 AM