Using The Remote Control - Sharp AY-XM09BE Operation Manual

USING THE REMOTE CONTROL

INSTALLING BATTERIES
1
Remove the battery cover at the
back of the remote control.
2
Insert batteries in the compart-
ment, making sure the ± and
— polarities are
aligned.
• Lines will be indicated on the
display when batteries are
properly installed.
3
Reinstall the battery cover.
NOTES:
• The battery life is approximately one year in normal use.
• When you replace the batteries, always change both batteries, and make sure
they are the same type.
• If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
• If you will not be using the unit for a long time, remove the batteries from the
remote control.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the
unit's signal receiver window and press
the desired button. The unit generates a
beep when it receives the signal.
• Make sure there is no curtain or other
object between the remote control and the
unit.
• The remote control can send signals from
up to 7 metres away.
Use two size-AAA (R03) batteries.
correctly
8
+
-
-
+
Battery cover