Maintenance - Sharp AY-XM09BE Operation Manual

MAINTENANCE

Be sure to turn the air conditioner off and turn the circuit breaker
CAUTION
off before performing any maintenance.
CLEANING THE FILTERS
1
2
3
3
2
1
CLEANING THE UNIT AND THE REMOTE CONTROL
CAUTION
• Do not directly splash or pour water on them. Water can cause electrical shock or
equipment damage.
• Wipe them with a soft cloth.
• Do not use hot water, thinner, abrasive powders or strong solvents.
MAINTENANCE AFTER
AIR CONDITIONER
SEASON
1
Operate the unit in the COOL
mode, tepmerature setting 32°C,
for about half a day to allow the
mechanism to thoroughly dry.
2
Stop the operation and turn off
the circuit breaker, if you have
one exclusively for the air condi-
tioner.
3
Clean the air filters, then reinstall
them.
The air filters should be cleaned every two weeks.
1
TURN OFF THE UNIT
2
REMOVE THE FILTERS
1
Lift the open panel.
2
Push the air filters up slightly to unlock them.
3
Pull the air filters down to remove them.
3
CLEAN THE FILTERS
Use a vacuum cleaner to remove dust. If the
filters are dirty, wash them with warm water and
a mild detergent. Dry filters in the shade before
reinstalling.
4
REINSTALL THE FILTERS
1
Reinstall the filters in the original positions.
2
Close the front panel.
3
Push the centre part of the panel firmly to
lock it in place.
MAINTENANCE BEFORE
AIR CONDITIONER
SEASON
1
Make sure that the air filters are
not dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
CAUTION
3
Check the outdoor mounting rack
periodically for wear and to make
sure it is firmly in place.
17