Adjusting The Air Flow Direction - Sharp AY-XM09BE Operation Manual

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
The air flow direction is automatically preset in each mode as
follows for optimum comfort:
COOL and DRY mode
HEAT mode
HOW TO ADJUST THE AIR FLOW DIRECTION
Press the SWING button on the
remote control once.
• The vertical adjustment louvre will
change its angle continuously.
Press the SWING button again
when the vertical adjustment lou-
vre is at the desired position.
• The louvre will stop moving within
the range shown in the diagram.
• The adjusted position will be memo-
rized and will be automatically set to
the same position when operated the
next time.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for the adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Horizontal air flow
Diagonal air flow
Adjustment range
COOL and DRY mode
The adjustment range
is narrower than the
SWING range in order
to prevent condensa-
tion from dripping.
12
HEAT mode
The range is wide so the
air flow can be directed
toward the floor.