Table of Contents
Advertisement
USING THE REMOTE CONTROL
INSTALLING BATTERIES
1
Remove the battery cover at the
back of the remote control.
2
Insert batteries in the compart-
ment, making sure the
polarities are correctly
aligned.
• Lines will be indicated on the
display when batteries are
properly installed.
3
Reinstall the battery cover.
NOTES:
• The battery life is approximately one year with normal use.
• When you replace the batteries, always use two new ones of the same type.
• If the remote control does not operate normally after replacing the batteries, take out
the batteries and replace them again after 30 seconds.
• If you will not be using the unit for a long time, remove the batteries from the remote
control.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the unit's receiver window and press the desired
button. A beep sound will be emitted when the unit receives the signal.
• Make sure no objects, such as curtains, are between
the remote control and the unit.
• The remote control operates from up to 7 meters
away.
• Do not expose the receiver window to strong, direct
sunlight, which can adversely affect its operation. In
such case, close the curtains to block the sunlight.
• Use of a fluorescent lamp with a quick starter in the
same room might interfere with transmission of the
signal.
• The unit might be affected by signals emitted from the
remote control of a television, VCR or other equip-
ment used in the same room.
• Do not leave the remote control in direct sunlight or
near a heater. Also, protect the unit and remote con-
trol from moisture and shock which can discolour or
damage them.
Downloaded from:
http://www.usersmanualguide.com/
Use two size-AAA (R03) batteries.
and
MODE
TEMP.
FAN
TIMER
5
Battery cover
Advertisement
Table of Contents
