Listening To A Cassette Tape - Sharp QT-MP3W Operation Manual

Listening to a cassette tape

QT-MP3W
Cassette Tape
Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
TAPE (STAND-BY)
CD
RADIO
FUNCTION
13
PAUSE STOP/EJECT F.FWD REWIND
ON
/
1
Set the FUNCTION switch to TAPE.
2
Open the cassette compartment by pushing the STOP/
EJECT
3
Load a cassette into the cassette compartment with the
side to be played facing up.
4
Press the PLAY
5
To advance the tape, press the STOP/EJECT /
then press the F.FWD
STOP/EJECT /
ton.
To interrupt playback:
Press the PAUSE
PLAY RECORD
Press the PAUSE
To stop playback:
Press the STOP/EJECT / button.
Precautions:
Be sure not to press the PLAY
taneously, or the tape will become damaged.
Before changing from one tape operation to another, press the
STOP/EJECT / button.
Do not press the PAUSE
operations are in progress. The F.FWD
ton will not be released when the tape end is reached. Once this
occurs, press the STOP/EJECT / button.
Notes:
Power on indicator will not light up in Tape/Stand-by mode.
Display will become blank in tape mode.
Power on indicator will light up when tape play operation is
perform.
Tape play button will automatically released when the end of the
tape has been reached.
Fast forward or rewind button cannot automatically released when
the end of the tape has been reached. Make sure to press the
STOP/EJECT
reached.
/ button.
button.
button. To rewind, press the
button, then press the REWIND
button during playback.
button again to resume playback.
and REWIND
button whilst the fast forward or rewind
/ button when the end of the tape has been
button,
but-
buttons simul-
or REWIND but-