Sharp QT-MP3W Operation Manual page 19

Programmed play for CD or MP3/WMA disc with
folder
1
For MP3/WMA CD with folder, to-
tal folder number will be display.
2
Whilst in the stop mode, press
the MEMORY button to enter the
programmed save mode.
3
Select a track by pressing the
FOLDER ( or ) button to de-
sire folder.
Press the or
to select the desire track.
4
Press the MEMORY button to
save the track number.
5
Repeat steps 2 - 3 for other tracks and programmed num-
ber will automatic increase. Up to 20 tracks can be pro-
grammed.
"_ _ _" indicator will display on LCD after programmed up to 20
tracks.
If you make a mistake, the programmed tracks can be cleared
by pressing the button twice.
6
Press the / button to start playback.
FOLDER
Folder number
MEMORY
MEMORY
FOLDER MEMORY
Folder number
button
MEMORY
Track number
MEMORY
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
button. The "MEMORY" indicator will disappear and all the pro-
grammed contents will be cleared.
Notes:
When open the CD compartment, the programme is automatically
cancelled.
After you change the function from CD to another, the pro-
grammed selections will be cleared.
During programme operation, random play is not possible.
Notes:
This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3", "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
Copyright protected WMA files cannot be played back.
QT-MP3W
10