Specifications - Sharp QT-MP3W Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 110 - 127/ 220 - 240 V, 50/60 Hz
DC12V ["D" size (UM/SUM-1, R20 or HP-
2) battery x 8]
Power Power on: 13 W
consumption Power stand-by: 1.4 W
Output power RMS : 4 W (2 W + 2 W)
(DC OPERATION, 10% T.H.D)
Speakers 9 cm (3-1/2") full range speaker x 2
Dimensions Width: 410 mm (16-1/8")
Height: 150 mm (6")
Depth: 245 mm (9-1/2")
Weight 2.7 kg (5.9 lbs.) without battery
Radio
Frequency range FM: 88 - 108 MHz
AM: 531 - 1602 kHz
Tape recorder
Frequency response 80 - 8,000 Hz (Normal tape)
Signal/noise ratio 40 dB
Wow and flutter 0.3% (WRMS)
Motor DC 9 V electric governor
Bias system AC bias
Erase system Magnet erase
CD player
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency 60 - 20,000 Hz
response
QT-MP3W
18