Page 1
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. PORTABLE CD STEREO SYSTEM MODEL QT-MP3W OPERATION MANUAL...
Page 2
Wiring diagram of this model is subject to change for improvement without prior notice.
Page 3
Wiring diagram of this model is subject to change for improvement without prior notice.
Page 4
Wiring diagram of this model is subject to change for improvement without prior notice.
Page 5
Wiring diagram of this model is subject to change for improvement without prior notice.
Page 6
Wiring diagram of this model is subject to change for improvement without prior notice.
Page 7
Wiring diagram of this model is subject to change for improvement without prior notice.
Page 8
Wiring diagram of this model is subject to change for improvement without prior notice.
Page 9
Wiring diagram of this model is subject to change for improvement without prior notice.
Special notes QT-MP3W WARNINGS CAUTION: This product is classified as a CLASS 1 LASER product. When the FUNCTION switch is set at TAPE/STAND-BY position, Use of controls, adjustments or performance of procedures other mains voltage is still present inside the unit. than those specified herein may result in hazardous radiation This unit contains no user serviceable parts.
Special Note Contents QT-MP3W Supply of this product does not convey a license nor imply any right Page to distribute content created with this product in revenue-generating General Information broadcast systems (terrestrial, satellite, cable and/or other distribu- Precautions ......... 3 tion channels), revenue-generating streaming applications (via Inter- Controls and indicators .
Operation with AC power Operation with batteries QT-MP3W AC 110-127/220-240 V, 50/60 Hz To AC INPUT To a wall socket 1 Disconnect the AC power lead, and remove the battery com- partment cover. Check the setting of the AC voltage selector located on the rear 2 Insert 8 "D", size batteries (UM/SUM-1, R20, HP-2 or similar) panel before plugging the unit into a wall socket.
Sound Control Listening to a CD or MP3/WMA QT-MP3W disc This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.
Page 17
QT-MP3W Playback TAPE (STAND-BY) Set the FUNCTION switch to CD, Power "ON" indicator will RADIO lights up. FUNCTION Press the OPEN button to open CD door. X-BASS TAPE (STAND-BY) Place the disc on the spindle, label side up. • AM •...
Advanced CD or MP3/WMA disc playback QT-MP3W Repeat play and Random play Notes: If you press the button during random play, you can move All tracks or a programmed sequence can be continuously repeated. to the track selected next by the random operation. On the other The track on the disc can be played in random order automatically.
Page 19
QT-MP3W Programmed play for CD or MP3/WMA disc with To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the folder button. The "MEMORY" indicator will disappear and all the pro- grammed contents will be cleared. For MP3/WMA CD with folder, to- FOLDER tal folder number will be display.
MP3/WMA folder mode (only for MP3/WMA files) QT-MP3W To playback MP3/WMA (Windows Media Audio) file Procedure to playback MP3/WMA disc There are many music sites on the internet that you can download To playback CD-R/RW. MP3/WMA (Windows Media Audio) music files. Follow the Press the OPEN button, and load a MP3/WMA disc.
Listening to the radio QT-MP3W Set the FUNCTION switch to RADIO. Set the BAND SELECTOR switch to FM or AM. X-BASS TAPE (STAND-BY) Turn the TUNING control to tune in to a desired station. • AM • FM RADIO FUNCTION BAND Set the FM MODE switch to FM (ST) to receive FM stereo transmission whilst listening to FM.
Listening to a cassette tape QT-MP3W Cassette Tape Set the FUNCTION switch to TAPE. Before playback: Open the cassette compartment by pushing the STOP/ For playback, use normal or low-noise tapes for EJECT / button. the best sound. (Metal or CrO tapes are not recommended.) Load a cassette into the cassette compartment with the side to be played facing up.
PLAY RECORD RADIO FUNCTION SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). For recording, use only normal tapes. Do not use metal or CrO tapes.
Recording to a cassette tape (continued) QT-MP3W Recording from the built in microphone Programmed track recording from CD Select the memories track you want to record. Set the FUNCTION switch to TAPE. After memories the selected track, press the RECORD Load a cassette into the cassette compartment.
Many potential problems can be resolved by the owner without call- ing a service technician. Symptom Possible cause If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. Cannot record. Is the erase-prevention tab re- moved? General...
Maintenance Troubleshooting chart (continued) QT-MP3W Cleaning the cabinet Before transporting the unit Periodically wipe the cabinet with a soft cloth and a diluted soap Remove CD from the unit. Make sure there is no CD in the disc solution, then with a dry cloth. spindle.
Specifications QT-MP3W As part of our policy of continuous improvement, SHARP reserves CD player the right to make design and specification changes for product Type Compact disc player improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may...
Page 28
SHARP CORPORATION 92L01TMP300010 06H R KI 1...