Saving Camera Files In The Pc; Saving Data Using The Save Buttons - Ricoh Caplio Gate for Windows Operation Manual

Saving Camera Files in the PC

You can save image, voice memo and motion picture files
recorded with the camera in a specified folder in the PC.
Check that the camera is properly connected to the PC before
proceeding.
Important
• You cannot select specific files on the camera.
• To avoid the names of saved files being overwritten, consecutive file
names are assigned and the files are saved in the specified folder. If,
however, the number exceeds 9999, an error message will be
displayed.
• Whenever possible, use the AC adapter and avoid powering the
camera by the battery. If the power cuts out during operation, the
operation will have to be performed again.
• Do not connect or disconnect the AC adapter or USB cable when
the camera is turned on or data is being transferred. The camera or
PC may be adversely affected.
Note
• Files are recorded by the camera in the following formats. Still
image files: Exif2.1 (*.JPG); Non-compressed files: TIFF-RGB
(*.TIF); Text files: TIFF-MMR (*.TIF); Motion picture files:
AVI(*.AVI); Voice memo: WAV (*.WAV).

Saving Data Using the Save Buttons

You can save files in the camera into the PC using the RICOH
Gate Save buttons.
Data is saved in accordance with the settings registered on the
Save buttons.
m m m m See "Changing the Save Button Settings" (p.28).
Note
• If you save files using the default Save 1 or Save 2 button, the files
in the camera will be saved in the following settings.
<Still Image Format>
Still images will be saved in the same format as when they were
recorded.
<Destination Folder>
A folder will be automatically created according to shooting date
in the specified folder where the program is installed.
(Camera ➝ PC)
3
27