6. Special Operations under
Printing Files Directly from Windows
You can print files directly using Windows "lpr" commands.
Setup
Follow the procedure below to make network environment settings.
A
Enable TCP/IP using Web Image Monitor, and then set up the printer's net-
work environment about TCP/IP including IP addresses.
TCP/IP of the printer is set as default.
B
Install a TCP/IP in Windows to set up the network environment.
Consult the network administrator for the local setting information.
C
To print, install "Printing service for UNIX" as the network application.
Reference
For details about setting the IPv4 address of the printer using DHCP, see
p.69 "Using DHCP".
This completes the setup for specifying a printer using an IPv4 address
when printing. When using a host name to specify a printer, proceed to
p.52 "Using a Host Name Instead of an IPv4 Address" and continue the
setup.
For details about Printing service for UNIX, see Windows Help.
Windows
51