Installing The Software; To Install The Software - Ricoh Caplio Gate for Windows Operation Manual

Installing the Software

This section explains how to install the necessary software,
such as RICOH Gate, USB Driver for connecting the camera to
a PC, and QuickTime.

To Install the Software

I To install the Caplio RR10 Software
Exit all other applications before following the procedures
below to install the software.
Note
• If you start up Windows and connect the camera to the PC before
installing the software, the [Add New Hardware Wizard] screen
will be displayed. If this happens, click on [Cancel] and proceed to
install the software after Windows is up and running.
• This section explains the installation procedure by the standard
installation method. Users who are familiar with PCs and digital
cameras may choose to specify the software they wish to install.
• For Windows 2000, users with administrator rights should login
first before installing the software.
• To check software installed by this procedure, see "Caplio RR10
Software" (p.8).
1
Turn the PC on and start up Windows.
2
Insert the supplied CD-ROM in the CD-
ROM drive.
The initial CD-ROM screen will be displayed.
Note
• If the initial screen is not
displayed, refer to the CD-
ROM and double click on
[Setup.exe] in the Caplio
RR10 folder to activate the
installer.
1
11