Learning Mode - Zenith MTS Stereo Color TV Operating Manual & Warranty

REMOTE CONTROL MODEL LRZl.455
LEARNING MODE
Your remote can learn new functions - a total of 20 - in
any or all of its four op¢rati_g modes. You can teach a new
function to any button txcept
MODE mad LEARN.
1. Press and hold LEARN until mode indicator lights
(about 4 seconds).
2. Enter "99" then press ENTER on the learning remote
to enter the Learning mode. All four mode indicator
lights wiLl light momentarily. The mode indicator light
for the current mode (TV, VCR, CABLE or AUX) will
them begin flashing.
3. Place the learning and teaching remotes head to
head (on a table or other flat surface). Press and
hold any button on the TEACHING remote.
The TEACHING remote may have to ix: moved side-
to-side until the two remotes are aligned properly. The
remotes are aligned properly when the mode indicator
lighton the LEARNING remote stops flashing and
remains on continuously. Leave them in this position
until all desired functions have been learned.
Learning
Remote
,w w
• I
/\1
\\ \.
\
l
I
i
Teaching
Remote
,
S.
Use MODE on the LEARNING remote to choose
the mode for the equipment you wish to operate.
Press the button on the LEARNING remote you
wish to teach. The mode indicator light will begin
flashing.
NOTES:
+
t
• MODE and LEARnt cannot be taught.
• While the mode indicator light i._fishing you cm
change your mind and choose another button on tht
LEARNING remote to be taught or change operat
i_ modes.
Press and HOLD 1the button on the TEACHINC
remote you want the LEARNING remote to learn
The function
has been learned
when all mode in
dicator lights on the LEARNING remote light up.
Repeat steps 5 and 6 to teach up I:o 20 functions.
NOTE;: If you attempt to teach more than 20 func
tions, the LEARNING remote will flash all fou
mode indicator lights in a chasing manner to indi
cute that no more buttons can be taught. You ma
now
choose
to:
a. Use LEARN to exit Learning mode.
b. Re-teach a butto_a whichhas a]:ready been taugt
by pressing that button.
g. Use LEARN to exit the Learnin, g mode. AlI fox
mode indicator lights will flash three times to ind
cate you are leaving the Learning; mode.
NOTES
• If no button is pressed for 60 seconds while in Learnlr
mode, the remote will automatically exit Learning mo¢
(all four mode indictor lights will _Lsh three times).
• If a new brand code is programmed im a particular mot
(TV, VCR, CABLE'. or AUX), all buttons in that mo_
which have learned rtew functions will need to be re-taug
those new functions,
_.o 6 - 9