Zenith MTS Stereo Color TV Operating Manual & Warranty page 6

I ,
CONNECTIONS FOR YOUR TV
i
STEP1. MAKE BASIC CONNECTION TO TV
There arefour basic hook ups toyourTV; outdoorantenna
(or master antenna) with or without VCR, and cablc.'fV
system with or without VCR. Select the hook up that be.st
fits yournecd.s. Se._ thefollowing diagrams.
Your ¢onnr.ction is made to one of the A2_"r/cABLE jacks
on the back of the "Iv'. These jacks ac.€_pt 75-ohm cable ter.
minatut in an F-type male connector. You may want to do
the hook-up yourself, or _,11 a TV servic: technician, or a
c.abl¢ company.
Antenna Connection to "IV
IfYou Have a Round Antenna Wire:
Connect the 75-ohm round antenna wire to either
the ANT/CABLE 1 or ANT/CABLE 2 jack on the
TV.
If You Have n Flat, Twin-Lead Antenna Wire:
Use the 300/75 ohm adapter included with the TV.
Attach the ends of the wire to the adapter and plug
it into either the ANT/CABLE 1 or the
ANT/CABLE 2 jack.
:" i////
, /////
Round Wire
NOTE: The antenna may b¢ connected into the ANT/
CABLE 2 jack, however, connecting to the ANT/CABLE 1
jack may produce a better picture in weak signal areas.
0--0 0
LOOP OUT ANTIP..At_.E 2 ANT/P..AB_ 1
TO DECOOER
B°
Antenna Connection to VCR and TV
1. Antenna Hook Up
Connect the 75-ohm round antenna wire into
ANTENNA IN jack on your VCR.
2. VCR Hook Up
Connect the ANTENNA OUT wire from VCR
.into either the ANT/CABLE I or the
ANT/CABLE 2 jack on the TV.
NOTE: The antenna may b¢ connected into the AN'I'.'
CABLE 2 jack, however, connecting to the ANT/CABLE 1
jack may produce a better picture in weak signal areas.
_1-o 1 -2