Clock Set; Captions - Zenith MTS Stereo Color TV Operating Manual & Warranty

Mts stereo color tv with picture-in-picture surround sound closed captions remote control
Table of Contents

Advertisement

SETUP MENU
CLOCK
SET
]Purpose
Sets the clock in the TV to the correct time. After the time
is set, the current time will appear on the C,hanaeVTime dis-
play whenever the TV is turned on, the channel is changed,
or ENTER is pre.sse.d.
IPmver Failure Note: The time will have to be reset if power
I:othe "IV is interrupted.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CI-L LABELS
TUNING BAND
AUTO FINE TUNE
÷CLOCK SE'r
CAPTIONS
CH. BACKGROUND
I0:30
Selecting Clock Set
To Use CLOCK SET from i_.mote Contrail
1.
CLOCK SET should k,e selected
if you followed
the
"Basic
Menu Operation"
given in the "On-Screen
Menu"
section.
2.
Use the numbered
buttons
on the remote
control to
enter the current
time. Press EN'FER to start the
clock.
For example,
to set tl_e clock to 10':30, press 1, then
0, then 3, then 0; and then press ENTER.
If you
enter an invalid time, such as 14:35 or 2:80, the time
will disappear
and you can enter
another
time.
To Use CLOCK SET from Control Panel
1.
Use SELECT
Up/Down
to highlight
CLOCK SET
in the SETUP
MENU.
2.
Use ADJ Left/Right
to set the time, and then press
ENTER
to start the ,:lock.
CAPTIONS
Purpose
Displays dosed captions (CC) or informational text when
available on the selected channel.
To Access CAPTIONS Indirectly
1.
CAPTIONS
should be selected
if you followed
the
"Basic
Menu Operation"
given in the "On-Screen
Menu" section.
2.
One
of five different
selections
is shown:
OFF,
CAPTION
1, CAPTION
2, TEXT
1, and TEXT 2.
3.
Press ADJUST
(ADJ)
Left/Right
to select desired
mode of operation.
4.
The display
disappears
from the screen
automat-
ically in about 10 seconds,
or you may press ENTER
(ENT)
to remove
the display
immediately.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. I.ABELS
TUNING BAND
AUTO FINE TUNE
CLOCK"SET
-D.CAPTIONS
CH. BACKGROUND
CAPTIOH 1
Selecting
Captions
To Access CAPTIONS Dirl_Jy
1.
Press
CC-OUIT
on the remote
control
to selec
CAPTIONS.
One of the five different
selections
shown:
OFF, CAPTION
1, CAPTION
2, TEXT
..
and TEXT 2.
2.
Press
ADJUST
(ADJ)
Left/Right
to select
ti:
desired
status.
3.
The display
disappears
from the: screen
autom:':
ically in about 10 seconds,
or you may press ENTE':
(ENT)
to remove
I:he display
immediately.
Application
Your new TV is able to de_'.,ode and clispltaythe dosed cap
tions and informational
te_I that are broadca.qt with some
TV shows. Captions can bc subtitles for r.he hearing im-
paired, or translations
in+to another langnage. Information_.
text can be the daily program schedule
for the TV station,
or special announcements.
Look for a (CC) or similar sign in your TV schedule, or o_
the video tape cassette, which indicates that captions are
provided.
The dosed caption signal is recorded
by all VCRs when
recording a "IV broadcast
or copying a tape having dosed
captions.
(continued on next pa_ :.
_8o.o
9 - 4

Advertisement

Table of Contents
loading

Table of Contents