Ch. Background - Zenith MTS Stereo Color TV Operating Manual & Warranty

Mts stereo color tv with picture-in-picture surround sound closed captions remote control
Table of Contents

Advertisement

SETUP MENU
,CAPTIONS
(CONTINUED)
About Closed Caption Operation
,Once you turn CAPTIONS ON, they will stay ON until you
turn CAPTIONS
OFF. Captions will appear as they are
:received. If captions stop being received, they will stop ap-
pearing on theTV. Ifthey are received agaia, captions will
automatically appear again on the TV. The captions will ap-
pear on the "IV as they were created.
If they were created
:incolor, they will appear in color. If they were created in
both upper and lower case letters, they will appear in both
upper and lower case letters.
'The "IV can not show more than one on-screen display at a
time, so no captions will appear until all other displays have
been removed from the screen.
To remove a display that is interfering with captions, press
ENTER until the display disappears.
Likewise, you can in-
stantly n:move any captions by pressing ENTER to call up
theChannel/Time display. W hen youpress ENTER
again,
the ChannelFrime
display disappears
and you return to cap-
tions.
CAPTIONS
has four different selections that can be made:
CAPTION
1, CAPTION
2, TEXT 1 or TEXT 2. At the
time of this writing, very little appears in any selection ex-
cept CAPTION
1. Therefore,
you should select CAPTION
I and leave it in that position unless you know there is some-
thing you want to see in one of the other selections.
Once
you make a selection, that selection is remembered until
you change it.
=m-=.=t=_
===e_._=Q.=le=
Hello!
Are you
theft?
Typical Captions Display
n_!
tonight t
at 7:00PM on
¢tmnn¢l
2.
J
Typical Text Display
_
aption may be shown
anywhere on the screen.
(Shown here at bottom
of screen.)
Fixed size: text window.
May be _11black when no
information is shown.
CH. BACKGROUND
Purpose
When you turn on your 'l'V, the ChanneLtTime display show
the current
channel time (if set)
and type of audio
signal
(STEREO,
MONO or 2ND AUDIO/SAP).
The CH.
BACKGROUND
feature allows you to show the numbers
and letters on a small colored fceld which serves as the back-
ground. NOTE: This background
will then also appear on
the Mute display as well.
To Operate CH. BACKGROUND
1.
CH. BACKGROUND
should be selected
if you fol-
lowed" the "Basic
Menu
Operation"
given in the
"On-Screen
Menu" section.
3.
4.
One of two different
selections
is shown:
ON oz
OFF.
Press
ADJUST
(ADI)
Left/Right
to select
the
desired
status.
The display
disappears
from
the screen
automat
ically in about 10 seconds,
or you may press ENTEF
(ENT)
to remove the display immediately.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DI=I
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
->- CH. BACKGROUND
ON
Selecting Ch. Background
9-S

Advertisement

Table of Contents
loading

Table of Contents