Replacement Method - Epson EMP EMP-9100 Owner's Manual
Epson multimedia projector owner's manual emp-9100, emp-100nl
Hide thumbs
Also See for EMP EMP-9100:
- User manual (122 pages) ,
- Communications manual (20 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
Replacement method
1
Switch off the power supply, allow the projector to cool down, and then disconnect the
Power Cord.
The amount of time required for the projector to cool down will depend on the surround-
ing temperature.
2
Once the projector has cooled down sufficiently, remove the Fan.
· Approximately sixty minutes are required for the projector to cool down sufficiently.
· Remove the two screws holding the Fan in place.
3
Withdraw the lamp.
Loosen the three screws holding the lamp in place, and then pull the lamp out towards
you.
4
Attach a new lamp.
Align the direction, push the lamp in as far as it will go, and then secure it in place with
the three screws.
92 - Replacing the Lamp
Advertisement
Table of Contents
