P In P Function - Epson EMP EMP-9100 Owner's Manual

P in P Function

The video image will be displayed as a sub-screen inside the computer image or video image.
1
Press the [P in P] button.
Operation instructions will be displayed at the bottom left-hand side of the sub-screen sit-
uated at the top right-hand side of the main screen.
2
Press the [Enter] button on the remote control to move the position of the sub-screen.
3
Press the [E-Zoom] button to change the size of the sub-screen.
4
Press the [1] button to switch across to sub-screen sound.
Press the [2] button to return to the main-screen sound after the sound has been switched.
5
Press the [Enter] button to set the sub-screen display.
The operation guide in the bottom left-hand corner will be erased.
Point
· The sub-screen will be erased when the [PinP] button is pressed again.
· The computer image or video image will be displayed in the main screen and the video
image (Video, S-Video) will be displayed in the sub-screen, and the video image on the
sub-screen can be amended with the PinP settings. (see page 67)
· Switch the position, size, and sound of the sub-screen prior to fixing the sub-screen's dis-
play.
· The sub-screen can be switched between five different sizes.
P in P Function - 59