Connecting The Video Equipment; In The Case Of Composite Image Signals; In The Case Of S Image Signals - Epson EMP EMP-9100 Owner's Manual

Connecting the video equipment

Switch off the power supply to the projector and video equipment prior to attempting to
make the connection.
Point
The audio signals output the selected image's sound.

In the case of composite image signals

· Connect the projector's Video Port to the video equipment with the supplied RCA Video
Cable (Yellow).
· Connect the L-Audio-R ports with the RCA audio cable supplied (red/white) to output
sound from the projector's speakers.
To the audio output port L (white)
To the audio output port R (red)

In the case of S image signals

· Connect the projector's S-Video Port to the video equipment with the S-Video cable (available
on the open market).
· Connect the supplied RCA Audio Cable (Red/White) to the S-Audio/Audio #2 Port if the
sound is to be output from the projector 's speakers.
To the audio output port L (white)
To the audio output port R (red)
Video Port (yellow)
To the video output port (yellow)
RCA Audio Cable (supplied with the projector)
S-Video Port (yellow)
To the S-Video output port
S-Video Cable
(available on the open market)
RCA Audio Cable (supplied with the projector)
Connecting the video equipment - 35
Audio Port (white)
Audio Port (red)
Audio Port (white)
Audio Port (red)