Reviewing Daily Or Weekly Series :Recordings; Recordings List; Series Recordings List; How To Watch One Channel While Recording Another: Watch And Record - Zenith SR2745 Operating Manual & Warranty

Reviewing daily or weekly series
recordings: Series Recordings List
StarSight keeps track of five daily or weekly series
recordings.
1. Call up the Recordings list, as shown in the last
section. Point again to "TO DO" and press the
trackball. You will see the Series Recordings list.
2.
To cancel a Series Recording, simply highlight the
series and press the RECORD button on the Z-Trak
remote. Then point to the red area on the
confirmation Pop-up and press the trackbail. This
automatically cancels all individual recordings
within that series.
13. Point to "QUIT" and press the trackball to resume
watching TV.
!;_ i!iii'_iiiiiiiii!iii! S E R I E S T O B E R E C O R D E b _ii!J_i'_'_ii_i:_,!
_ WK WED 8:00P Beverly 1:00
E_P_ _TWThF 6:30A Getting :30
_H_ C B L I 0 :0 5 P
How to watch one channel while recording another: Watch and Record
If you have a cable box:
If you do not have a cable box:
1. After recording begins, move the pointer to the top
1.
of the screen and point to "SOURCE." Press the
trackball. The pointer will now appear in blue.
Point to "Ant/Cable 2" and press the trackball. You
can now watch any unscrambled channel.
.
Move the pointer to the fight side of the screen to
change channels. (NOTE: you will not be able to
use StarSight functions while on the "Ant/Cable 2"
source.)
e
While you're recording a program, simply change
channels to watch a different program. You can still
access the StarSight menus while yourrecording is
in progress. Of course, don't attempt to record
another current program.
2.
For more inff_rmation about the SOURCE menu,
refer to the TV portien .of this guide.
NOTE: If you only see snow, put your TV/VCR
switch on the VCR in the TV position.
e
To resume normal viewing once the recording has
completed (and to resume using StarSight) point to
the "SOURCE" symbol at the top of the screen and
press the trackball. Point to "Ant/Cable 1" and
press the trackball.
C-12