Zenith SR2745 Operating Manual & Warranty page 6

INSTALLING STARSIGHT
STEP 2. Hook-Up Equipment.
There are four possible choices for hooking up your
equipment. Only one of these choices will apply to your
particular equipment setup.
Turn to the appropriate Setup and follow the instructions,
then proceed to "STEP 3. Auto Programming Your TV."
If you have... Turn to
TV Only Setup 1
TV and Cable Box Setup 2
TV and VCR Setup 3
TV, VCR and Cable Box Setup 4
Setup 1: TV Only
If you receive your television signal by antenna or basic
(:able TV (no Cable Box):
1. Attach the cable coming out of the wall Q to the
"ANT/CABLE 1" jack on the back of your Zenith TV.
2. Plug your TV into a power outlet not controlled by a
light switch and turn your TV on.
3. Proceed to "Step 3. Auto Programming Your TV."
O TARSIGHT
CONTROL
PORT
CABLE A
[-O
IV BACK
1-2