Step 2. Hook-Up Equipment - Zenith SR2745 Operating Manual & Warranty

STEP 2. Hook-Up Equipment.
There are four possible choices for hooking up your
equipment. Only one of these choices will apply to your
]particular equipment setup.
Turn to the appropriate Setup and follow the instructions,
then proceed to "STEP 3. Activate StarSight."
If you have... Turn to
IV Only Setup 1
TV and Cable Box Setup 2
TV and VCR Setup 3
TV, VCR and Cable Box Setup 4
Setup 1: TV Only
If you receive your television signal by antenna or basic
Cable TV (no Cable Box):
1. Attach the cable coming out of the wall Q to the
"ANT/CABLE 1" jack on the back of your TV.
2.
Plug your TV into a power outlet not controlled by a
light switch and turn your TV on.
3.
Proceed to "Step 3. Activate StarSight."
0 Sl,_:_l_t-rr
CABLE A
r-Q
"iV BACK
A-2