Checking Your Starsight Setup - Zenith SR2745 Operating Manual & Warranty

TESTING STARSIGHT
,Checking Your StarSight Setup
Now that you've subscribed, the final step is to
test your equipment setup. Here's how:
1.
Press ENTER/TUNE on your remote control when
you see the "Congratulations!" message.
StarSight will now guide you through a series of
on-screen displays. Please follow the instructions
carefully. All you have to do is respond to the
on-screen prompts. If you're using a VCR, you'll be
prompted to insert a videotape that can be used for a
30-second recording test.
12.
Find the Cable Box and VCR codes on your
Subscription Checklist.
If you've listed more than one code for a given
brand of Cable Box and VCR, don't worry:
StarSight lets you test each code until the correct
one has been found.
Be sure the Remote Emitters you placed previously
are positioned according to the instructions in the
preceding "Installing StarSight" section.
e
Next, you will receive wogram information
automalically from PBS station. With StarSight
subscription and equipment setup complete, you'll
begin to receive StarSight program information
whenever your TV is turned off or turned to your
PBS station. Initially, it will take between 4 and 12
hours to collect program information, so we
recommend that you simply wait overnight. While
your TV is off, it will gather the informatiion that it
needs. Following this in tial process, your system
will automatically be updated with the latest
program information any time your TV is turned off.
Your StarSight Systern is now all set up and ready
to collect program information.
YOU SHOULD ALSO KNOW...
It is important that you:
• Always be sure your TV set is plugged in.
• Always leave your Cable Box ON, otherwise you risk losing your StarSight program infcrmation.
• Be sure you leave your VCR OFF when it's not being used. If you forget to turn off your VCR, a scheduled recording
cannot occur.
• It will normally take from 3 to 5 seconds for Cable Box channels to change. This is the tree it takes fcr the Remote
Emittm"s infrared signal to communicate with your Cable Box.
2-1