Effect Function; Cursor/Stamp; Box - Epson EMP 8100NL Owner's Manual

Effect Function

The [Effect] buttons add decorations to images displayed during presentations. The decora-
tion settings can be amended on the effect menu. (see page 66)

Cursor/Stamp

Imprints a stamp on the image.
1
Press the [1] button.
The selection will switch between three different cursor/stamps whenever the [1] button
is pressed.
2
Lower the [Enter] button on the remote control unit to move the position of the cursor/
stamp.
3
The stamp will be imprinted at the location of the cursor when the [Enter] button on the
remote control unit has been pressed.
Point
· The effect function will be canceled and the cursor will disappear when the [Esc] button is
pressed.
· The decoration will be erased when the [5] button is pressed.
· The mouse cannot be used when the effect function is in progress.

Box

Draws a Box on the image.
1
Press the [2] button.
2
Lower the [Enter] button on the remote control unit to move the cursor to the starting
position.
3
Press the [Enter] button to set the start position.
56 - Effect Function