Epson EMP 8100NL Owner's Manual page 86

· The image is
disturbed.
· Noise appears
84 - When the Indicators Provide No Help
G
Has the cable been connected correctly?
see page 25, 35
G
Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer's instruction manual for details on how to amend the
signals.
see page 25
G
Has the [Sync., Tracking and Position] been adjusted?
The image can be adjusted by regulating the [Tracking] and [Sync]
buttons on the projector while monitoring the image on screen.
Adjustments can also be made by opening the [Menu].
see page 48, 65
G
Has the cable length been extended?
There are cases where noise will occur if the cable length is extended.
G
Has the signal format setting for the image been set correctly?
· In the case of computer images:
Set the signal format with [Menu] − [Video] − [Resolution]. There are
cases where the image signals being input cannot be determined in
the [Auto] mode.
see page 65
· In the case of video images:
Select the video signal format with [Menu] − [Video] − [Video Signal].
There are cases where the video image signals being input cannot be
determined in the [Auto] mode.
see page 66