Epson EMP 8100NL Owner's Manual page 71

Top Sub Menu
Menu
Ad- Comp2Sync
vanced Termination
Rear Proj.
Ceiling
Reset
About
Reset Execute
all
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
· The information menu displays the status of the input source settings being projected.
Sets the Computer #2 termination mode to enable image pro-
cessing from a Port.
On: Terminated in analog (75
OFF: TTL input
· Usually used at [OFF]. Set at on with the switcher when
analog 75 termination is required.
Set at [ON] to project images onto a half-transparent screen
from the rear. The projected image will be inverted.
Set at [ON] to project images when suspended from the ceil-
ing. The projected image can be be inverted from left to right
and up and down.
· The optional ceiling suspension unit is required to suspend
the projector from the ceiling. (see page 95)
Returns all advanced setting menu adjustment values to the
default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Select [Reset All] to return all image and sound values to
the default settings.
(Displays the current settings)
Returns all items in the set-up menus to the default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Execute the [Reset] function from each individual sub menu
to return the image and sound settings to the default values
for each menu.
· The User's Logo Capture, Lamp ON Time, language and
BNC settings cannot be restored to the default values.
Perform the reset procedure after the lamp has been
replaced. (see page 92)
Function
Ω
)
Menu Operations - 69
Default Value
OFF
OFF
OFF
-
-
-