Specification; Self-Diagnostic Test - Oki C5650dn Network User's Manual

S
PECIFICATION
Frame Types
Network Interface
Network Protocols
Functions
NOTE:
Not all utilities, features or protocols are supported by
every operating system. Please check with your User's
Guide and support website for latest information.
S -
ELF DIAGNOSTIC TEST
With the printer power switched on, press the push-button
located on the network interface panel (at the rear of the printer)
for more than three seconds and release. The self-diagnostic test
results and configuration settings are printed.
On the first page of the Network Information that is printed out,
under the heading "General Information" the MAC Address is
given. For example:
MAC Address 00808784E3F1
The Ethernet address is therefore: 00:80:87:84:E3:F1
IEEE 802.2
IEEE 802.3
Ethernet-II, SNAP, AUTO
100BASE-TX
10BASE-T
TCP/IP V4, V6
IEEE 802.1x
Network layer: ARP, RARP, IP, ICMP
Session layer: TCP, UDP
Application layer:LPR, FTP, TELNET, HTTP, IPP,
BOOTP, DHCP, SNMP, DNS, SMTP, POP3, SLP, Bonjour
IPX/SPX (NetWare)
Remote printer mode (up to eight file servers and 32
queues)
Print server mode over IPX/SPX (up to eight print
servers)
Encrypted password supported in print server mode
EtherTalk
NetBEUI
NetBIOS, WINS
Self-diagnostic test printing
Banner supported
Monitoring and configuration by Web browser
Printer status notification by E-Mail
Network configuration > 7