Oki C5650dn Network User's Manual page 22

ITEM
POP Detail...
Use SMTP Receive
Domain Filter...
SNTP Tab
In this Tab, you can configure
SNTP related items.
ITEM
Use SNTP
NTP Server 1
Address
NTP Server 2
Address
Adjust Interval
Local Time Zone
COMMENTS
Set the following:
Use APOP Select if you want to use APOP.
POP3 Port Set the port number for APOP (default
Number is 110).
Mail Polling Set interval to retrieve E-Mail(s) from
Time the POP3 server. Selectable values,
OFF, 1min, 5min (default), 10min, 30
min, 60 min.
Enable/disable SMTP receive.
Set the following:
Use Domain Enable/disable domain filtering.
Filter
Filter Policy Select ACCEPT (the default) or DENY.
Domain Filter Define up to five domain filters.
COMMENTS
Enable/disable SNTP (Simple Network Time Protocol).
Set the IP address or host name for NTP Server 1.
Set the IP address or host name for NTP Server 2.
Set the interval for sending time update requests to the
server. Select 1 hour (the default), 12 hours or 24 hours.
Set the local time zone from -12:00 to +13:00. Minute
interval is selectable from 00 (the default), 15, 30 or 45.
Network configuration > 22