Oki C5650dn Network User's Manual page 66

7. Click the pop-up menu and choose your printer model.
8. Click Add.
9. Click the Printer Setup Utility menu, and choose Quit
Printer Setup Utility.
After adding the printer, you should configure printer hardware
options. Refer to
page 67.
AppleTalk connection
If you have not already done so, run the Oki software installer
before following the steps below.
1. Start the Printer Setup Utility.
This is located in the Applications > Utilities folder.
NOTE:
This utility is called Print Center on Mac OS X 10.2.x.
2. Click Add....
3. From the pop-up menu, choose AppleTalk.
4. Select the printer you wish to connect to.
5. Click Add.
6. Click the Printer Setup Utility menu, and choose Quit
Printer Setup Utility.
"Configuring printer hardware options" on
Apple Macintosh > 66