Page 1
Projector User Manual X 120 LVP-X120A MODEL...
Page 2
Control this projector by using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. Connection Projector + IBM PC or IBM PC compatibles to RS-232C terminal to Com1 Comport RS-232C cable D-SUB 9P Mini DIN 8P Note: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector,...
Functions can be controlled by a personal computer: • Turn the ON or OFF • Changing input signals • Button input by remote control • Reading warning data • Picture adjustment By making a programme, you can also control this projector by a personal computer automatically. [EXAMPLE] Commands to be used (ASCII code) Time...
Page 4
Control this projector by using a personal computer (Continue) [Example] Turn the power ON (' 'is for ASCII code) Sending commands Status code from Meaning from the PC etc. projector 30 30 21 0D Command for POWER ON '0' '0' '!' ' 30 30 21 0D Command received '0' '0' '!' '...
Page 5
6) Warning commands Read the past warning data. The personal computer doesn’t attache the data code onto the warning commands to send. On the other hand, the projector which has received a command, attach the warning data as the data code to reply.
Page 6
Control this projector by using a personal computer (Continue) When a personal computer sends the command, data code will not be attached. On the other hand, the projector which has received a command will attach the recent operating status then send. [Example ] Input was Video when the operating status of the input terminal was confirmed.
Page 7
MITSUBISHI ELECTRONICS AMERICA, INC. 5665 Plaza Drive Cypress, CA 90630 871D269B1 Printed in Japan...