Drilling To A Specific Depth; Locking Chuck Desired Depth - Craftsman 143.213150 Owner's Manual

piece.
2- Loosen the depth scale lock.
3. With the switch OFF, bring the drill down until the
TIP or lips of the drill are even with the Mark. DEPTH
SCALE LOCK
4. Turn the depth scale counterclockwiseuntil it stops
moving.
5. Tighten the depth scale lock.
6. The drill willnow De stopped at this depth until the DEPTH
depth scale is readjusted. SCALE
MARK
\
DEPTH
ANOTHER WAY -- DEPTH SCALE SCALE
1. With the switch OFF, loosen the depth scalelock.
2. Turn the depth scale clockwise untilthe depth scale
indicator points to the desired drilling depth on the
depth scale.
3. Tighten the depth scale lock.
POINTER
4. The chuck or drill will now be stopped after traveling
downward the distance selected on the depth
scale.
LOCKING CHUCK DESIRED DEPTH
1. With the switch off--loosen the depth scale lock.
2. Turn the feed handles until the chuck is at the
desired depth Hold feed handles at this position.
TIP TOUCHES
WORKPIECE
20