Quick Change Upper Blade Holder; Getting To Know Your Scroll Saw - Craftsman Contactor 113.236400 Owner's Manual

. assembly and alignment
(L0ckKnob With Screw)
This access0ry is supplied in the loose
parts
bag. it
enables the user to remove the upper portion of the
blade quickly when making interior cuts in a workpiece.
i.1Remove the hex socket screw in the upper blade
• t!
holder with the "T wrench; use the blade change rod
for additional support,
2_ Replace the screw with the quick release blade knob
and reinstall blade.
REMOVE SCREW
WITH "T" WRENCH r_
ROD
INSTALL
QUICK CHANGE
UPPER BLADE HOLDER
KNOB
\-.._
i i i i i
getting to know your scroll saw
1 TENSION KNOB
BLADE HOLDER
GUARD
•BLADE SUPPORT
_. WORK HOLD-DOWN
BEVEL
_- 4 LOCK KNOB
BEVEL SCALE
POINTER
1. TENSION KNOB - Tightening the knob (clockwise)
will increase the tension on the blade. Loosening it
(counterclockwise) will decrease the tension.
2. WORK HOLD-DOWN AND BLADE SU PPORT- Pro-
vides added control of workpiece, protection for op-
erator and support for the blade.
3. BLADE HOLDERS - Retain and position the blade.
4. BEVEL LOCK KNOB - Loosening knob allows blade
and housing assembly to tilt up to 45 ° right and 35 ° left
for bevel Cuts.
6 SPEED CONTROL/ON-OFF
SWIVEL _ KNOB
LOCK
5. BEVEL SCALE - Shows degree blade is tilted for
bevel cutting.
6. SPEED CONTROL/ON-OFF KNOB- For speedcon-
trol Setting, refer to the "Choice of Blade and Speed"
table. Thegn- Off Knob has a locking feature. THIS
FEATURE 1S INTENDED TO HELP PREVENT UN-
AUTHORIZED USE BY CHILDREN AND OTHERS.
7. TABLE SWIVEL LOCK - Allows table to be tilted at
compound angles and locked in position.
8. BLADE GUARD - Defines area of moving blade.
14