Advertisement
OPERATION
HOW TO USE THE INDEX LEVER
1. Stopthe engineand disconnect t he
sparkplugwire fromthe sparkplug.
2.
Loosen the front wheel knob shown in
Figure 10. Slide the front wheal all the
way to the right side.
3.
Securely Ughten the front wheal knob.
NOTE: To prevent the blade from hit-
ting the wheel while trimming, make
sure the front wheal is set in the ex-
treme right position.
4. Disengagethe index lever (see
Figure 11). Movethe Index lever to the
notchmarked90°.
5. Reconnectthe sparkplugwire to the
sparkplug.
6.
Start the engine.
7,
Move the clutch lever to the desired trim-
ming height.
A
WARNING:
While the engine is
running, never leave the Edger.
Before you adjust the wheels or
change the blade position, always dis-
engage the cutting blade end stop the
engine.
F-OO1106M
12
Advertisement
