Chery V5 User Manual page 43

5. Under manual gearshift mode, the
selected gear can be accepted only
when the gearshift request conforms
with the requirements
transmission controller.
6. The braking no matter under manual
gearshift mode or the
gearshift mode can achieve
automatic gearshift function without
any gearshift operation;
7. The gear selector lever at "N" or "P"
position during driving is strictly
prohibited; otherwise the transmission
will be damaged, for that Chery
Automobile Co., Ltd. will not be liable
for warranty.
8. In order to avoid the mis-operation
of the gearshift lever, please check if
the operating lever is shifted to the
correct position; After operation, make
sure to check the position of gear
selector lever by means of
instrument display.
Gear Selector Lever Lock
of the
automatic
the
Stop Button
When to shift the gearshift lever from
the
"P" to "R", from "N" to "R", or from
"R" to "P", make sure to step down the
brake and push down the stop button
(shown in above figure) on the
gearshift lever handle to relieve the
gearshift lever lock. When to shift from
"N" to "D", make sure to step down the
Driving
brake pedal, disregarding
push-down of the stop button on the
gearshift lever handle; It's unnecessary
to push down the stop button when
shift the gearshift lever within other
positions.
Gear Display
When the ignition switch is turned on,
the gear selector lever position will be
displayed on the central screen of the
dashboard.
The display of various gears is shown
in following figures:
Display of P Position:
the
43