Loading The Roll Paper - Epson Stylus Pro 7000 Startup Manual

Loading the roll paper

To load roll paper, follow the steps below.
1. Make sure that the printer is on.
2. Press the Paper Source button repeatedly until the Roll Auto
Cut light or Roll Cutter Off light comes on.
c
3. Make sure the Operate light and Pause light are not flashing,
then push the paper set lever all the way down.
appears on the LCD panel.
c
2-6
Printing and Printer Management
Caution:
Depending on the kind of paper used, automatic cutting may
not be possible.
Caution:
Do not move the paper set lever while the Operate light or
Pause light is flashing. Doing so may damage the printer.