Epson Stylus Pro 7000 Startup Manual page 19

Note:
The asterisk in the product number is a substitute for the last digit, which
varies by country.
Installing the optional interface card
To install an optional interface card, follow these steps:
Note:
Before you install the optional interface card, see the documentation that
comes with the card for setup information.
1. Make sure the printer is turned off.
2. Make sure that the power cord is unplugged from the
electrical outlet.
w
Warning:
Do not install the interface card when the printer is
connected to an electrical outlet. Doing so may damage the
printer.
3. Disconnect the interface cable, if necessary.
4. Use a cross-head screwdriver to remove the two screws
securing the shield plate to the optional interface slot, and lift
off the plate. Be sure to keep the screws to use when you
re-install the shield plate.
Setting up the Printer with Your Computer
1
1-5