Installing The Printer Software; For Windows - Epson Stylus Pro 7000 Startup Manual

Installing the Printer Software

After connecting the printer to your computer, you need to install
the software included on the "Printer Software for
EPSON STYLUS PRO 7000" CD-ROM shipped with your printer.
Your printer software includes:
Printer driver and utilities
The printer driver runs, or "drives," your printer; use it to
make settings such as print quality, speed, media type, and
paper size. The Nozzle Check, Head Cleaning, and Print Head
Alignment utilities help you keep your printer in top
operating condition. EPSON Status Monitor 3 (for Windows)
or EPSON StatusMonitor (for Macintosh) notifies you of
printer errors and displays printer status information such as
the amount of ink remaining.
Online guide
The online Reference Guide helps you learn more about your
printer.
If you are using the floppy disk version of the software, make a
backup copy of the EPSON printer software disk before you begin
installation. If you wish to make a floppy disk version of the
printer software on your CD-ROM, you can use the driver disk
creation utility included on the CD-ROM.

For Windows

Follow these steps to install your printer software.
1. Make sure that your printer is off.
2. Turn on your computer and start Windows. If the New
Hardware Found screen or any other Wizard appears, click
Cancel.
1-8
Setting up the Printer with Your Computer