Basic Setup; Set Day. Time & Humidity - Carrier Infinity control Homeowner's Manual

SetDay, Time & Desired H umidity
1 Flipdown thedooratthebase ofthe
Infinity
TM
Control.
2 Press the BASIC button.
CURRENT TIME/DAY
3 Adjust the highlighted HOUR setting ,, _ -,
using the TIME (+\-) button.
MINUTE :
30
DAY : MONDAY
4 Press SCROLL to highlight MINUTE. SETHUM_OFY
5 Adjust the MINUTE setting using the TIME IlililililBBBB
L H
(+\-) button, p_EssBASIOTO EXIT
6 Press SCROLL to highlight DAY.
7 Adjust the current DAY setting, using the TIME (+\-) button,
until the correct day is displayed.
8 Press SCROLL to highlight HUMIDITY.
9 Press the red HEAT button to set the heating humidity.
10 Adjust the desired heating humidity using either (+/-) button.
11 Press the blue COOL button to set the cooling humidity.
12 Adjust the desired cooling humidity using either (+/-) button.
13 If a ventilator has been installed, press scroll to highlight
FRESH AIR.
14 Adjust your desired FRESH AIR setting using the TEMP (+/-)
button. For a description of fresh air settings, see FRESH AIR
VENTILATION on page 24 in this manual.
15 Press the BASIC button to exit.
- OR -
If you need to readjust one of your settings, use the SCROLL
button to highlight the desired setting, then make your changes.
16 Close the door.
NOTE: You con exit ot ony time. When exiting, you will be
prompted to sove chonges if you hove mode ony Select"YES"
to sove your chonges, "NO" to revert bock to previous settings.