Heating Humidity - Carrier Infinity control Homeowner's Manual

Heating H umidity
Ifyouhave a whole h ouse h umidifier, heat r ecovery ventilator (HRV)
orenergy r ecovery ventilator (ERV) asa part o fyour s ystem, you
canselect your d esired h eating h umidity setting a ndchange h ow
your s ystem controls thehumidifier orfresh airventilation.
1 Flip down thedoor n ear t hebase ofthe
Infinity
TM
Control.
2 Press the ADVANCED setup button.
3 Press the RIGHT button twice to view the HEATING HUMIDITY
screen (3 of 5).
4 Use the TEMP (+\-) button to select your desired humidity setting.
5 To exit, press ADVANCED or simply close the door.
- OR -
6 If you want to change how your system controls the heating
humidity, scroll to HUMIDIT'_ You will have three options to
choose from:
a. OFF - The system will disable humidification or
ventilator dehumidification.
b. MANUAL - The system will control the relative humidity
in your home based on your desired set point.
c. AUTO - The system will control the relative humidity in
your home based on the setting you have selected and
outside air temperature. The humidity target is lowered
automatically as the outdoor temperature decreases.
7 Use the TEMP (+\-) button to make your selection.
8 If you want to change how your system controls fresh air
ventilation scroll to FRESH AIR. For a description of settings
see FRESH AIR VENTILATION, page 24 in this manual.
9 Use the TEMP (+\-) button to select AUTO, HIGH, LOW OR DEHUM.
10 To exit, press ADVANCED or simply close the door.
NOTE: You con exit Advonced Setup ot ony time. When exiting,
you will be prompted to sove chonges if you hove mode ony
Select "YES" to sove your chonges, "NO" to revert bock to previ-
ous settings.