Related Manuals for Carrier 33CSPGMR-01
Summary of Contents for Carrier 33CSPGMR-01
- Page 2 This unique accessory will allow you to copy stored information from a thermostat. Then the information may be loaded into other thermostats, without the need to manually enter each item. With the EZ Programmer your options are: • Copy all data from a thermostat (time, day of week, time period programming, and advanced...
- Page 3 The EZ Programmer has a unique location in its memory to store data from each thermostat model that it is compatible with. The EZ Programmer will automatically recognize the thermostat model that it is connected and upload the correct data for that model. The EZ Programmer over writes only the existing data for the model...
- Page 4 The accessory connector of the programmer =s inserted into the accessory jack. Accessory release button Accessory jack located on thermostat bottom Accessory connector The LED will glow green when connected to a compatible thermostat To release the programmer from the thermostat: press and hold the accessory release...
- Page 5 After the accessory connector of the programmer is inserted into the accessory jack of a compatible thermostat: The LED will flash red a number of times based on the model of the thermostat it recognizes. Reconnect, if the red/green LED does not flash at all. Red/Green LED 1 flash = 33CS400-01...
- Page 6 This button, when pressed, will copy (download) all the stored data from the connected thermostat to the programmer. The LED will turn red, then will turn green when complete. This button, when pressed, will copy (upload) the time period programming from the programmer to the connected thermostat.
- Page 7 To u_01oad All data programming: This button, when pressed, will copy (upload) all the stored data from the programmer to the connected thermostat. The LED of the programmer will turn red, then turn green when copying complete. To download All data: This button, when pressed, will from the connected thermostat...
- Page 8 To u_01oad Time Period programming: This button, when pressed will copy (upload) all the time period data from the programmer to the connected thermostat. The LED of the programmer will turn red, then turn green when copying is complete. TIME PERIOD Page 8...
- Page 9 To u_oload Time & Day of Week: This button, when pressed, will copy (upload) the time & day of the week from the programmer to the connected thermostat. The LED of the programmer will turn red, then turn green when copying is complete.
- Page 10 To completely erase all of the contents of the programmer and restore it to its factory default values, insert a paperclip into this hole and depress the small reset switch. Screw holding the battery cover. replace the battery: Remove the screw holding the battery cover.
- Page 11 Timeofday" Day of week F or C readout Programmable Auto Changeover Dead band 1 Dead band 2 Dead band 3 2nd stage timer 3rd sta_e timer 2nd sta_e turn off pt. Cycle limit Forced differential Fan off delay Back light Keypad Lock Pro_.
- Page 12 One Year Warranty This Product is warranted to be flee from defects in material and workmanship, if it appears within one year from the date of original installation, whether or not actual use begins on that date, that the product does not meet this warranty, a now or rernanufactured part, at the...