Bose CINEMATE SERIES II Owner's Manual page 15

SYSTEM SETUP
When you connect the CineMate ®system to a power
source, the green LED on the front of the interface
module flashes for 10 seconds, then extinguishes,
indicating that the system has been connected to
power.
When you press the remote control On-Off, Volume Up/
Down, or Mute button, the green LED on the interface
module flashes.
Continue with _ on the next page.
CAUTION; Bose recommends using a safety agency-
approved surge protector on all electronic equipment.
Voltage variations and spikes can damage electronic
components in any system.
13