Bose CINEMATE SERIES II Owner's Manual page 10

SYSTEM SETUP
=
Insert each plug into the connector on the proper
speaker.
The plug marked RIGHT goes into the speaker
placed to the right of your TV (facing toward the TV).
(Refer to _ for placement guidelines.)
=
Insert the single plug at the other end of
the speaker cable into the connector
labeled SPEAKERS on the back of the
Acoustimass ® module.
Fastener screws
5, Tighten each fastener screw by hand to secure
the plug.
CAUTION: Do not plug the Acoustimass module into
an AC power (mains) outlet until all other components
are connected.
6, Continue with _ on the next page.
8