Bosch Nexxt washer Operating, Care And Installation Instructions Manual page 27

Menu Select
Press the Start/Pause button
and hold down (5 seconds).
The program starts. The
indicator light is lit (red).
The child lock is activated.
[]_3 To deactivate the child lock
temporarily press the
Start/Pause button again(5
seconds) until the Start/Pause
indicator light flashes. Now you
can change programs or
options. Press the Start/Pause
button to reactivate the child
lock.
[_You can stop a running
program with activated child
lock turning the program
selector to "off'!!
When you switch it on again
the interrupted program will
continue.
Unloading laundry at the end
of a cycle with "child lock: on"
Press the Start/Pause button
and hold down (5 seconds).
You can open the door and
remove laundry.
The child lock setting remains
activated even if you switch off
the appliance.
[_3 Next time you switch on the
appliance child lock is
activated. The door is locked
and no changes can be
selected.
Press the Start/Pause button
(5 seconds) to open the door.
Deactivating the child lock
Turn the program selector to
the desired program to switch
on the appliance.
Press the Menu button until
"Child lock: on" is displayed.
The "_-o" symbol flashes.
Press the Select button until
"Child lock: off" is displayed.
E_You can set child lock on/off
before starting a program or in
"Pause" mode only.
Setting the time
You can set the current time. The
settings are retained even if your
washing machine is not used for up
to 6 weeks.
Turn the program selector to
the desired program.
Example:
E]
Press the Menu button until
"Time:" is displayed. The hours
display flashes.
The Start/Pause indicator light
flashes (red).
If no buttons are pushed within
10 seconds the display will
revert back to normal "Ready".
Changed settings wilt be
retained.
Press the Menu button until the
minutes display flashes.
The StaCdPause indicator light
flashes (red).
iiiiiiii
Press the Select button until
the minute display is correct.
The time is now set.
[_ Press the Menu button, the
menu function ends.
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
Press the Select button until
the hour display is correct.
27