Bosch Nexxt washer Operating, Care And Installation Instructions Manual page 26

Signan
The acoustic signai indicates the
start or end of the program,
operating errors or malfunctions,
You can specify the voIume of the
acoustic signat,
Activating, specifying the
signal volume and
deactivating the signal
Turn the program selector to
the desired program.
Load the laundry and close the
door.
The Start/Pause indicator light
flashes (red).
Example:
S;;{to _:!iiiii
Press the Menu button until
"Signat: off" is displayed.
The "q,)" symbol flashes.
The Start/Pause indicator light
flashes (red).
[]_3 If no buttons are pushed within
10 seconds the display wilt
revert back to normal "Ready".
Changed settings will be
retained.
Press the Select button until
"Signal: continuous" is
displayed.
While holding down the Select
button the volume of the
acoustic signal wilt increase.
When the signal has reached
the required volume, release
the Select button.
Hold down the Select button
after 10 seconds the display
indicates "Signat: max".
To deactivate the signal, if the
display indicates "Signal: max",
hold down the Select button,
after 10 seconds the disptay
indicates "Signal: off".
E]
The selected setting is retained
after the washing cycle.
You can select other settings by
pressing the Menu button and
change them by pressing the
Select button.
Menu Select
i
Press the Start/Pause button.
The program starts.
The indicator light is tit.
E_The individual program steps
are indicated in the display field.
Child lock
You can secure your washing
machine to prevent selected
functions from being changed
inadvertently.
If the child lock has been selected:
No changes can be made while
the program is running.
The door remains locked at the
end of the program.
Activating the cMd lock
Turn the program selector to
switch on the appliance.
Press the Menu button until
"Child lock: off" is displayed.
The "_-o" symbol flashes.
Press the Select button until
"Child lock: on" is displayed.
When the menu is left, the "_-o"
symbol is permanently
displayed.
[_You can set child lock on/off
before starting a program or in
"Pause" mode only.
Starting a program with "cMd
look: on"
Turn the program selector to
the desired program.
Load the laundry and close the
door.
The Sta_dPause indicator light
flashes (red).
26