Oven Cooking; Control Panel - Jenn-Air PROSTYLE JJW9827DDP Use & Care Manual

O C
VEN OOKING

Control Panel

A
The control panel is designed for ease in programming. The display window shows options for each function and moves from
step to step through the programming process. In double ovens, Upper Oven or Lower Oven is displayed to indicate which oven
is being programmed. Oven display above is a double oven programmed for bake and broil operations.
A Options and Set
Knobs - Upper Oven
B Quickset Pads
(next to display
window, both sides)
C Display window
D Favorites
E Help
F Setup
G Back
H Options and Set
Knobs - Lower Oven (select models)
Options and Set Knobs
Use the Options knob to select Bake, Broil, Convect, Clean
and More Options. Turn the knob to display the options.
When the desired choice is flashing in the display, press the
knob to make the selection.
Use the Set knob to set Time, Temperature or name Recipes.
Turn the knob to display the desired setting. When the
desired choice is flashing in the display, press the knob to
make the selection.
Quickset pads can also be used to select the desired function
or option in the display window. To select the option or
function, press the Quickset pad next to the word.
If you need to back out of a function or option in the display,
press the Back pad. When your programming is complete,
press the Set knob or wait three seconds and the function will
start.
B
Use to program the upper oven.
Use to select options in display
window.
Displays oven functions, options
and time of day.
Use to access, program or save
baking cycles.
Press for on-screen help.
Use to view or change factory
default settings.
Returns display to previous
screen.
Use to program the lower oven.
C D E F G
Up or Down arrows in the display indicate additional screens
with additional options. Press the Quickset pads next to the
arrows to scroll through the display.
Note: Three seconds after entering the function, option,
number or letter, the function will automatically be en-
tered. If more than thirty seconds elapse between steps in
programming, the function will be canceled and the
display will return to the previous display.
Clock
Setting the Clock:
1. Press the Setup pad.
2. Select "Clock" using the Quickset pads.
3. Select "Time".
4. Enter the time using the Set knob. (Upper Oven Set knob
for double wall oven models).
5. Select AM or PM in 12 hour mode. (For 24 hour clock, see
page 5.)
6. Select Set.
7. To exit the Setup mode, press Setup or Back.
4
H