Getting Started - Xerox DocuPrint 96MX Forms Creation Manual

Getting started

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
6. 6Coding a complex form
This chapter reviews the commands discussed earlier in this guide
and it also illustrates a sample form along with the entire forms
source library (FSL) that created it. Enter the commands as shown in
the sample FSL to produce the form.
In this section you can practice entering the forms description
language (FDL) commands that instruct the LPS to accurately
produce a sample form. Refer to command definitions discussed
earlier in this guide as needed.
Note: You must be familiar with the DocuPrint 96/DocuPrint 96MX
LPS editor utility or the editor at your host.
The sample form that you will create is shown in figure 6-1. The
illustration of the sample form is reduced in size; your form will be
actual size.
Figure 6-1. Earnings Register
6-1