About The Reference Set - Xerox DocuPrint 96MX Forms Creation Manual

About the reference set

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
The DocuPrint 96/DocuPrint 96MX Laser Printing System Forms
Creation Guide is intended for forms designers who have a basic
knowledge of the DocuPrint 96/DocuPrint 96MX Laser Printing
System (LPS). You may have received on-site training, or you may
have attended a Xerox FDL training course.
The forms designer's tasks consist of writing FDL commands to
produce electronic forms. These tasks include entering source code
into the LPS to create new electronic forms, as well as updating,
revising, and printing the forms on the LPS. If you are also
responsible for printing variable data on the forms in addition to
performing other operations on the laser printer, refer to the related
documents provided with your laser printing system.
The DocuPrint 96/DocuPrint 96MX Laser Printing System Forms
Creation Guide is one of eight manuals which make up the DocuPrint
96/DocuPrint 96MX LPS Reference Set. This guide explains the use
of Forms Description Language (FDL) commands that are used to
create forms. Its purpose is to do the following:
•
Describe the FDL commands necessary to create any desired
form with the correct page orientation, fonts, line widths, and
positioning of captions and logos
•
Explain fundamental printing terms and techniques
•
Describe the use of support tools in simplifying the creation of
forms.
This document is part of a reference set designed to help you receive
maximum benefit from your DocuPrint 96/DocuPrint 96MX laser
printing system.
To help you select the appropriate document for your needs, the
following section identifies the documents in the set and describes
the information contained in each.
Introduction
ix