FDL command syntax
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
A.
AFDL command summary
This appendix contains an alphabetized summary of the forms
description language (FDL) commands described in this manual. The
conventions and definitions used in describing FDL commands are
as follows:
KEYWORD
The required word(s) in the command
appear in uppercase and may be
abbreviated to the first three characters
(except for FMTn).
id
Identifier consists of 1 to 6 alphanumeric
characters (0 through 9, A through Z, "-").
stacked words
Parameters arranged one above another to
denote a choice.
...
Multiple occurrence of the preceding
bracketed parameter is permitted.
lowercase
The word, character, or phrase in lowercase
is to be replaced by a value.
[ ]
Optional. If omitted, system will substitute its
default.
{ }
Required choice of one of the parameters
the braces enclose.
unit
DOTS, XDOTS, IN, INCH, INCHES, CM, or
CENTIMETERS. If omitted, default to grid
size.
Table A-1 lists in alphabetical order the FDL commands and their
syntax.
A-1