Printing Using Lpr Utilities - Xerox DocuPrint Network Printer Series Client Manual

Printing using lpr utilities

Using lpr utilities in DOS
Using lpr utilities in UNIX
GUIDE TO SUBMITTING JOBS FROM THE CLIENT
PRINTING USING XEROX UTILITIES AND LPR UTILITIES (DOS AND UNIX)
You may print a document using the following lpr utilities:
•
lpr (DOS and UNIX)
•
lpq (DOS and UNIX)
•
lprm (DOS and UNIX)
•
lpc (UNIX only)
To use these lpr utilities in DOS:
•
If you are using FTP PC-TCP/IP software, these commands are
available with DocuPrint. Refer to your software documentation
for a description of all the options available.
•
If you are using the Wollongong Pathway Access network
communication package, you can use the lpr command to print
jobs, but the -C options are not available. Refer to the
documentation you received with your Wollongong software for
complete information.
•
If you are using Sun PC-NFS, you may be able to submit jobs to
DocuPrint if your system is configured to do so. Ask your
system administrator to verify this information. For complete
information on setting up the print capability, refer to your PC-
NFS software documentation.
•
To check status of jobs, use the Telnet utility.
To use these lpr utilities in UNIX:
•
If you are using Sun PC-NFS, you may be able to submit jobs to
DocuPrint if your system is configured to do so. Ask your
system administrator to verify this information. For complete
information on setting up the print capability, refer to your PC-
NFS software documentation.
•
All UNIX commands and options are case-sensitive.
•
To check status of jobs, use the Telnet utility.
The following sections provide the syntax, required arguments, and
options for the lpr utilities commands lpr, lpq, lprm, and lpc.
3-15